Applicable Sites of cell phone jammer

Unity in the anti-sea import and export operations side (base angle side), without doing countersunk. In principle, transport of water imported from the mold base, not directly into the internal model; straight body mode, to avoid the water from the pit through the model code should ensure that transport water tapping margin code mode Kengbian 5mm.. After the current carrying water from the same direction mode access, export, its distance should be larger than 30mm., Pipe joints and out of the hole from the bottom plate on the fixed minimum not less than 15mm. To ensure accurate positioning of the mold is closed, do not damage the die, which require the set-oriented positioning system. The technical index of cell phone jammerundertakes the strict testing of “Institute of Environmental Health and Related Product Safety.
Aids and father to square edge nail: injection molding, there is often considerable lateral force, lateral force if this is passed to the lead column, column-prone to cause deformation, or even stuck, damaged, so square aids or dad need to accurately locate the secondary side of nail to withstand the lateral pressure molding, the mold with the column-oriented complete addition, the guide column and with the gap between the guide sleeve, the demanding in terms of precision molds, this gap a bit bigger, you must use an aid or a father to square edge nail to ensure the accuracy preferred square aids. because of the strength, installation and maintenance, the overall square mold aids standard parts specifications. The technical index of cell phone jammerundertakes China CDC” (the unit is the national authorized certification body for testing electronic magnetic radiation).
When the product is particularly complex sub-surface, surface range, or pillow-bit products are not effective when the finished product are the same side of the plastic bits in the mold before and after the mold should be done directly on the cone positioning structure, its size width of 15 feet to 20 , height of between 8 to 10. And the injection mold process, the mold must be timely in excess gas emissions, to ensure production quality and the amount of mold and smooth. Exhaust system, including: product guide sleeve ﹑ exhaust vent.